4 Replacement Procedures
4.19 Speakers
Removing the Speakers
To remove the speakers, first remove the battery pack, keyboard, and top cover, and then follow
the steps below:
1. Remove one M2.5x3 screw securing the left speaker to the rear side of the top cover. Remove
one M2.5x3 screw securing the right speaker to the rear side of the top cover.
M2.5x3
M2.5x3
Figure 4-59
Removing the speaker screws
2. Remove the speakers.
Figure 4-60
Removing the speakers
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
4-53