Figure 4.28 Removing The Speaker Cushions; Removing The Speaker Cushions; Installing The Speaker Cushions; Installing The Speakers - Toshiba Satellite SERIES Maintenance Manual

Removing the Speaker Cushions

Remove the speaker cushions according to the following procedures and Figure 4.28.
1. Remove the four speaker cushions from the speakers.

Installing the Speaker Cushions

Install the speaker cushions according to the following procedures.
1. Pinch the speaker cushions and insert them into the speakers.

Installing the Speakers

Install the speakers according to the following procedures.
1. Seat the speakers in the correct position on the logic upper assembly.
2. Secure the four M2.5x6.5 screws as shown in Figure 4.27.
3. Route the speaker cables in the routing channels on the logic upper assembly.
Satellite A660/ProA660 Series Maintenance Manual
Downloaded from www.Manualslib.com

Figure 4.28 Removing the speaker cushions

manuals search engine
4 Replacement Procedures
4-38