4 Replacement Procedures
4.11 Bluetooth module
Removing the Bluetooth Module
Remove the battery and any optional devices before removing the Bluetooth module. In addition,
you have to remove the keyboard as described in the previous section to access the Bluetooth
module. Follow these instructions:
1.
Remove the silver M2.0x2.5 screw securing the Bluetooth module to the system board.
2.
Disconnect the Bluetooth FFC cable from the system board.
4-28
Figure 4-27
Removing the Bluetooth module screw
Figure 4-28
Disconnecting the FFC cable
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual