Toshiba Satellite M100 Maintenance Manual page 72

2.15 5IN1 Card Troubleshooting
This section describes how to determine if the 5IN1 card player is functioning properly. The
process is summarized in Figure 2-15. Perform the steps below starting with Procedure 1 and
continuing with the other procedures as required.
Procedure 1: 5IN1 (SD/MMC/MS/MS Pro/XD) card test
Procedure 2: 5IN1 socket replacement check
Procedure 1 5IN1 card test
The 5IN1 test card contains a 5IN1 test program. Ensure the card in fully inserted into the socket
before running the program.
If an error occurs during the 5IN1 card test, perform Procedure 2. If no error occurs, it is likely
that the original 5IN1 card was faulty.
Procedure 2 5IN1 card socket replacement check
The 5IN1 card socket may be damaged or defective, for instance the socket pins can be bent.
Disassemble the computer following the steps described in Chapter 4, Replacement Procedures
and replace the socket. If the problem persists, the system board may be defective or damaged.
Replace the system board with a new one following the steps in Chapter 4.
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
2 Troubleshooting Procedures
2- 40