Toshiba Satellite M100 Maintenance Manual page 143

Installing the Expansion Memory Module
CAUTION: Do not touch the connectors on the expansion memory module or on the
computer. Debris on the connectors may cause memory access problems.
Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.
2. Remove the black Non separate Screw with RAM door M2.5x6.5 (Special type) screw
securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Fit the module's connectors into the computer's connectors at about a 45-degree angle and
press the module carefully to ensure a firm connection.
5. Push the module down so it lies flat. The latches on either side will click into place to secure
the module.
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
4 Replacement Procedures
4-17