Toshiba Satellite M100 Maintenance Manual page 174

4 Replacement Procedures
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding section.
1. Seat the top cover, and secure the speaker cables, finger print unit FFC cable, and touch pad
unit FFC cable to the system board.
2. Secure the top cover with two M2.5x6 screws, two M2.5x8 screws, and one M2x4 screw.
3. Turn the computer upside down and secure the 18 screws to the rear panel.
4-48
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual