Toshiba Satellite M100 Maintenance Manual page 178

4 Replacement Procedures
3. Remove the Fingerprint module by lifting it gently.
Installing the Fingerprint Module
To install the Touch Pad, follow the steps below and refer to the figures in the preceding section:
3. Turn the top cover upside down and place the Fingerprint Module and the Fingerprint
Module Bracket in position on top.
4. Secure the Fingerprint Module bracket with two M2.5x2.5 screws.
4-52
Figure 4-58 Removing the fingerprint module
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual