Removing The Cable; Figure; Removing The Hexagonal Screws; Removing The System Board - Toshiba Satellite M100 Maintenance Manual

4 Replacement Procedures
4.21 System Board

Removing the System Board

To remove the system board, first remove the display assembly, keyboard, and top cover, and
then follow the steps below:
1. Remove the DC connector from its socket.

Figure 4-64

Removing the cable

2. Remove the two hexagonal VGA screws from the system board.
Figure 4-65

Removing the hexagonal screws

[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual 4-57