Toshiba Satellite M100 Maintenance Manual page 145

4 Replacement Procedures
Installing the Optical Drive Module
To install a device in the optical drive module bay, follow the steps below and refer to the figure
in the preceding section.
1. Make sure that the expansion memory door is opened and the ODD screw (M2.5x4, black) is
removed.
2. Slide the device into the optical drive module bay.
3. Use the black M2.5x4 screw to secure the optical drive module.
4. Replace the expansion memory module cover.
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual 4-19