Figure 4.18 Removing The Speaker; Speaker; Removing The Speaker; Installing The Speaker - Toshiba NB250 Maintenance Manual

4.5 WLAN Card
4.9

Speaker

Removing the Speaker

Remove the Speaker according to the following procedures and Figure 4.18.
1. Remove two M2.5x7.7 screws as shown in Figure 4.18.
2. Detach the speaker cable from the motherboard and remove the speaker from the logic
lower assembly.

Installing the Speaker

Install the speaker according to the following procedures.
1. Seat the speaker in the correct position on the logic lower assembly.
2. Secure the speaker with two M2.5x7.7 screws.
3. Attach the speaker cable to the motherboard.
NB250/NB255 Maintenance Manual
Downloaded from LpManual.com Manuals

Figure 4.18 Removing the speaker

4 Replacement Procedures
M2.5x7.7*2
4-29