Svmi-8 Card; Figure 3.12 Svmi-8 Card - Samsung OfficeServ 100 Installation Manual

3.14 SVMi-8 Card

The SVMi-8 card is installed in DCS slot on the expansion cabinet. Only one SVMi-8 can
be installed in an OfficeServ 100 system and it counts as eight stations of the power supply
rating. Check that the cabinet power switch is in the OFF position. Next, position the
SVMi-8 card in the grooves of the card guide and gently slide the card in until it makes
contact with the connector. Press gently but firmly on the top and bottom of the front edge
of the card until the card sits in its connector. Ensure that you have installed the correct
power supply.
© SAMSUNG Electronics Co., Ltd.
When installing SVMi-8 Card
Before installing this card it should be correctly configured with a hard disk drive
and the appropriate number of voice processing modules. One additional Voice
Processing Module can be added.

Figure 3.12 SVMi-8 Card

OfficeServ 100 Installation Manual/Ed.00
3-13