Call Completion - Samsung OfficeServ 100 Installation Manual

Call Offer
In case the counter party is busy or not answering when the station of another system
is called, the Camp-On function is required just like a calling in the same system.
The 'Call Offer' option in Program 823 shall be set to 'Y'.
If the 'Path Retention' option in Program 823 is set to 'Y', the station will be
automatically camped-on.
Call Intrusion
When the call receiving party in another system is busy, the barge-in or override function is
required just like a call in the same system. The following options shall be set:
The same program needed for barging-in or overriding is also required.
The 'Barge In Type' option in Program 206 shall be set to 'With Tone' or 'Without
Tone', and the 'Override' option in Program 701 to 'Yes', the 'Secure' option to 'No'.
To barge-in or override the station call of another system, the 'CI' option of Program
823 shall be set to 'Y'. And, the 'CI CAPABIL' option number of barging in station
shall be bigger than the 'CI PROTECT' option number of barged-in station. If the
numbers are same, the call cannot be intruded.

Call Completion

When the call receiving party in another system is busy or not answering, the Call Back
function can be used just like a call in the same system. The following options shall be set:
To do CCBS(Call Completion Busy Station) when the call receiving party is busy, the
'CCBS' option in Program 823 shall be set to 'Y'.
To do CCNR(Call Completion No Reply) when the call receiving party of another
system is not replying, the 'CCNR' option in Program 823 shall be set to 'Y'.
− The call completion functions operate only when the auto route selection is in use.
− The call completion in networking uses a separate signaling channel, which is
different from a call path, to set a call. If the call completion is set, the call is
terminated. Set the 'CC PATH RSV' option to 'Y'in order to maintain the already
formed call path to be used when the reserved call is reset later. To keep the
signaling channel connected, the 'CC SIG CONN' option shall be set to 'Y'. When
the reserved station becomes free and called back, but the calling station is busy,
the call completion reservation can be maintained by setting the 'CC SVC RETN'
option to 'Y'.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 100 Installation Manual/Ed.00
10-13