System A Programming - Samsung OfficeServ 100 Installation Manual

CHAPTER 10. Networking Description and Programming Procedure

10.3.1 System A Programming

Program 820 Set System Link Number (MCP1)
Index
SELF
SYS01
SYS02
SYS03
Program 821 Set Networking trunk line
Set TEPRI card connected with System B, or C as Q-Signaling.
Program 724 Change Dial Numbers (MCP1)
STN Dial Number
STNG Dial Number
TRKG Dial Number
FEAT Dial Number
NTWK LCR Dial No
Program 824 Convert Auto Route Selection Expansion Dial
Index Phone No.
01 21
02 22
03 23
04 24
05 25
06 26
07 51
08 52
10-16
Link ID Signal G/W
091 168.219.100.100
092 168.219.110.110
093
094 168.219.120.120
Set the extension number as 2000~2099.
Set the extension group number as 5000~5079.
Set 800, 801, 802, and 803.
Set LCR as 9 To make trunk line call, dial 9 and the
target telephone number.
IDX-01: 21 Is converted to 2100~2199 call number in 824.
IDX-02: 22
IDX-03: 23
IDX-04: 24
IDX-05: 25
IDX-06: 26
IDX-07: 51
IDX-08: 52
IDX-09: 53
Converted No. SZ Max
09221 4
09222 4
09223 4
09324 4
09325 4
09426 4
09251 4
09352 4
- Unnecessary because it is
connected only to PRI.
DISP MB
7 Y Y The station call of the system B
7 Y Y
7 Y Y
7 Y Y The station call of the system C
7 Y Y
7 Y Y The station call of the system D
7 Y N The station group call of the
system B
7 Y N The station group call of the
system C
© SAMSUNG Electronics Co., Ltd.