Tear-Off (Straight-Through) With Quick-Load - Intermec EasyCoder PF2i User Manual

Chapter 4—Media Load
Tear-Off with Quick-Load (Straight-through)
In addition to the media load procedure for tear-off (straight-through)
operation described earlier in this chapter, the EasyCoder PF2i can
optionally be fi tted with a set of Quick-Load guides that makes media
load much easier and quicker, especially if the printer has a short side
door. See Chapter 12, "Adjustments" for installation instructions.
Quick-Load cannot be combined with peel-off (self-strip) operation.
Use the <Feed> key (see fi gure #5) when loading the same type of media.
When switching to a new type of media, or if the printer does not feed
out the media properly, simultaneously press the <Shift> and <Feed>
keys to perform a "testfeed."
An optional label taken sensor can hold the printing of the next copy
in the batch until the present copy has been removed, see Chapter 9,
"Options."
Note: Full automatic loading, without the operator having to
press any key, requires a special set of Intermec Fingerprint
instructions in the application program.
26 Intermec EasyCoder PF2i—User's Guide (Fingerprint version)