Intermec EasyCoder PF2i User Manual page 116

Appendix A—Technical Data
Printing
Print Technique
Printhead Resolution
Print Speed (variable)
Print Width (max)
Print Length (max)
Media Width (min/max)
Media Width (min/max)
Media Roll Diameter
(max)
Media Roll Core Diameter
Ribbon Width (min/max)
Ribbon Roll Diameter
(outer)
Ribbon Roll Core Diam-
eter (inner)
Print Directions
Modes of Operation
Tear-Off (Straight-
through)
Peel-Off (Self-strip)
Firmware
Operating System
Smooth Fonts
Built-in scaleable fonts
(std)
Built-in bar code symbolo-
gies (std)
Startup Program (std)
108
Direct Thermal (Thermal Transfer as
option)
8 dots/mm (203.2 dpi)
100 to 200 mm/sec. (≈ 4 to 8 in./sec.)
56 mm (2.2 inches)
32767 dots = 409.5 cm (161.25
1
inches)
25 to 60 mm (1 to 2.36 inches)
40 to 60 mm (1.57 to 2.36 inches)
213 mm (8.38 inches)
38 to 40 mm (1.5 inches) or 76 mm
(3 inches)
25 to 60 mm (1 to 2.36 inches)
65 mm (2.56 inches) equivalent to
240-300 m (787-985 ft) of ribbon
25.4 mm (1.00 inches)
4
Yes
Optional
Intermec Fingerprint v8.10
TrueDoc and TrueType fonts
15
45
Intermec Shell v8.0
Intermec EasyCoder PF2i—User's Guide (Fingerprint version)
= 448 dots
Standard edge
guide
Quick-Load
guides
Depending on
ribbon thickness
With liner
takeup unit
Incl. Direct
Protocol
2
Unicode fonts