Wiring The Camera - Panasonic BB-HCM331A Installation/Troubleshooting Manual

Installation/Troubleshooting

1.13.1 Wiring the Camera

Check the location where the camera should be installed. Select the proper cable
suited to the camera location. Consult an authorized wiring electrician for cabling.
The camera can be mounted in the following ways.
1.
Put the cables through the connector cover (1.). Connect the DC plug of the
AC adaptor to the DC IN jack (2.) and Ethernet cable to the Ethernet port (3.).
Connect the AC plug of the AC cord to the outlet (4.).
• If you use External I/O, external speaker or external microphone, put the
cables through the connector cover.
External I/O
Notes
• Confirm that the indicator lights green.
• Check the location of the camera, the type and the length of the Ethernet
cable (Max. 100 m [330 feet]). Use an Ethernet cable as short as possible
for outdoor use. Lightning may cause serious damage to the camera or the
connected devices.
36
Ethernet port
DC IN jack
Connector
(1.)
Cover
(3.)
Ethernet cable
DC Plug
(2.)
To Network
(4.)
AC adaptor
Outlet