Using The Sd Memory Card - Panasonic BB-HCM331A Installation/Troubleshooting Manual

Network camera
Table of Contents

Advertisement

Installation/Troubleshooting

1.12 Using the SD Memory Card

The SD memory card (customer-provided) can store image data and replay them.
Follow the instructions below to insert the SD memory card into the camera.
1.
Open the cover on the side of the camera.
2.
Insert the SD memory card, and push with your finger until it clicks. Or push
the card lightly to remove.
Notes
Ensure that recording has been stopped, before removing the SD memory
card. (see page 82 of Operating Instructions on the Setup CD-ROM) If the
SD memory card is removed while recording, the image file will most likely
become unreadable. In this case, format the SD memory card again.
(Files will be deleted.)
Insert or remove the SD memory card after removing the sunshade.
3.
Replace the cover firmly.
Note
Format the SD memory card, before you record the image data. (see page 81
of Operating Instructions on the Setup CD-ROM)
34
Place the card face
to the front.

Advertisement

Table of Contents
loading

Table of Contents