Wall Mount - Panasonic BB-HCM331A Installation/Troubleshooting Manual

Wall Mount

Notes
• Drive mounting screws into the wall. Be careful to avoid touching any
metalwork (metal/wire laths etc.), conduits or electrical cables buried in
the wall.
• Do not mount the camera upside down. The image may be displayed
upside down.
• When mounting, we suggest using the hardware we provide. Mounting
in any other manner may cause the camera to fall, causing personal
injury or damage to the camera.
• To reduce the load on the mounting hardware, dress the cables neatly
and secure with tape.
Mount the flexible stand firmly to the
wall with the three screws (accessories).
165 mm
(6.5 inches)
Screw
Do not mount the camera on a soft
material. The camera may fall and
break down.
Use appropriate screws suited for
the material of the ceiling.
Adjust the camera position
and secure the flexible stand firmly.
[For assistance, please call: 1-800-272-7033]
Installation/Troubleshooting
Attach the camera screwing the
threaded mount into the stand/tripod
mounting hole.
Indicator
Caulk around
flexible stand
if necessary.
Roll up the cables and flexible stand with
the self bonding tape (accessories).
Waterproof the rest
of the cable.
Self bonding tape
Stand/Tripod
Mounting Hole
41