Advertisement
INSTALLATION OF CAMERA
Oo
Mounting at top
This camera
is originally designed to be mounted
from the top, as shown.
The hole is the standard
photographic
pan-head
screw
size
(1/4"'-20).
Mounting at bottom
Remove
the mount
adaptor on the top of the
camera by removing two fixing screws.
Attach the mount adaptor to the bottom as shown
in the diagram,
then
mount
the camera
on the
mounting bracket.
Make sure that the two original screws are used
when
mounting
the mount
adaptor; longer type
screws will break the inner component.
Mount Adaptor
Fixing Screws
& 4
Mounting at bottom
PREVENTION
OF
BLOOMING
AND
SMEAR
When the camera
is aimed toward spot lights or other
bright lights and light reflecting objects.
A vertical
stripe
(smear)
or
blooming
may
appear
therefore
the
camera
should
be
operated
carefully
in the
vicinity
of extremely
bright objects to avoid
the
vertical stripe (smear) or blooming.
Smear
ic
Bright object
(|
EXTERNAL SYNC SIGNAL
When
the camera
is used with non-standard external
sync,
the
camera
synchronization
may
be
lost.
Therefore the external sync signal should be specified
as CCIR
standard or the like.
Advertisement
