Panasonic BB-HCM331A Installation/Troubleshooting Manual page 30

Installation/Troubleshooting
5.
When the Single Camera page is displayed, the setup is completed.
• If Security Warning window is displayed, click [Yes] (see page 33).
Notes
• See page 16 of the Operating Instructions on the Setup CD-ROM for the
Single Camera page.
• If you enable Internet access to the camera, follow the procedures below.
•
•
30
When you are using a router supporting UPnP
1. Enable the Auto Port Forwarding feature on the UPnP page (see
page 58 of the Operating Instructions on the Setup CD-ROM).
2. Register with the Viewnetcam.com service on the Viewnetcam.com
page (see page 60 of the Operating Instructions on the Setup CD-
ROM).
3. Confirm the Internet access to the camera (see page 31).
When you are using a router not supporting UPnP
Follow the procedures shown on page 27.
TM
TM