Troubleshooting - Breville Boss BBL910XL Instruction Booklet

TROUBLEShOOTING

TROUBLEShOOTING
PROBLEM
Motor doesn't start or blade
doesn't rotate
food is unevenly chopped
food is chopped too fine or
is watery
food sticks to blade and jug
Blender Overloaded
EASy SOLUTION
• Check the blender jug and lid are securely in place.
• Check the ON | OFF button and selected function
button is illuminated.
• Check that the power plug is properly inserted into
the power outlet.
• This can happen when too much food is being
blended at one time. Try a smaller amount, and
work in batches if necessary.
• The ingredients may be too large. Try cutting into
smaller pieces. For best results, ingredients should
be in pieces no larger than ¾inch (2cm).
• Try blending for shorter period of time. Use the
PULSE | ICE CRUSH function for better control.
• The mixture may be too thick. Try adding more
liquid and/or using a slower speed for blending.
• This blender has a motor protection feature to
protect against over heating and/or over current
use. When activated OVERLOAD PROTECTION
will flash on the LCD and the blender will
be inoperable.
• If activated, turn the blender off by pressing the
ON | OFF button on the control panel, and unplug
the blender. Wait a few minutes then re-plug and
power ON the blender.
• If OVERLOAD PROTECTION is still flashing,
repeat and leave the blender for at least 20-30
minutes. Once OVERLOAD PROTECTION has
disappeared from the screen the blender is ready
to be used again.
• We recommend blending in smaller batches, or
cutting ingredients into smaller pieces.
15