Canon imageRunner 6570 Network Manual page 131

•
The machine's recipient settings:
The Protocol drop-down list: FTP
[Host Name]:
[User]:
[Password]:
[File Path]:
IMPORTANT
•
To use the host name of the above example for [Host Name], it is necessary to use
a DNS server. (This applies even if the machine and the FTP server are in the
same subnet.) If no DNS server is available, the host name setting should be
specified using the IP address of the FTP server.
•
Up to 128 alphanumeric characters can be entered for [Host Name] on the control
panel. Also, up to 255 alphanumeric characters can be entered for [File Path].
•
If you switch the language of the touch panel display, [Host Name] and [File Path]
may not be displayed correctly.
•
If the FTP port number is set to a value other than 21, specify the following for [Host
Name]:
<IP address of FTP server>:<Port number>
Example: 192.168.1.21:21000
NOTE
For instructions on how to specify recipient address settings, see Chapter 2, "Basic
Sending Methods," in the Sending and Facsimile Guide.
The settings for sending data to the FTP server are complete.
starfish.organization.company.com
User name entered in step 2
Password for the above user
Enter one of the following:
share (when using relative path)
/home/hsato/share (when using absolute path)
Setting Up a Computer as a File Server
3
3-85