Canon imageRunner 6570 Network Manual page 67

❑
If you want to store a range of IP addresses that are to be permitted, press
[Multiple Addresses] ➞ press [First Address] ➞ enter the first IP address in the
range using -
address in the range ➞ press [OK].
❑
Press [OK].
The display returns to the IP Address Range Settings screen.
❑
Press [Reject IP Address(es)] for <RX/Print Range>.
❑
Press [On] for <Apply Settings> ➞ press [Register].
❑
If you want to store only one IP address, press [Single Address] ➞ enter the IP
address that is to be rejected using
❑
If you want to store a range of IP addresses that are to be rejected, press
[Multiple Addresses] ➞ press [First Address] ➞ enter the first IP address in the
range using -
address in the range ➞ press [OK].
❑
Press [OK].
The display returns to the IP Address Range Settings screen.
● If you do not want to restrict the IP addresses of computers on
which the machine setting items can be set or browsed (using the
Remote UI or utility):
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range
Settings] appears ➞ press [IP Address Range Settings].
(numeric keys) ➞ press [Last Address] ➞ enter the last IP
(numeric keys) ➞ press [OK].
-
(numeric keys) ➞ press [Last Address] ➞ enter the last IP
3-21
Protocol Settings
3