Canon imageRunner 6570 Network Manual page 71

24
Specify a MAC address filter.
● If you want to enable a MAC address filter:
❑
Press [▼] or [▲] until [Receiving MAC Address Settings] appears ➞ press
[Receiving MAC Address Settings].
❑
Press [On] for <Apply Settings>.
❑
Press [Register].
❑
Specify the MAC addresses to allow access to ➞ press [OK].
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
IMPORTANT
•
Up to 100 MAC addresses can be specified.
•
If you select [On] for <Apply Settings>, you will become unable to access from
MAC addresses which have not been specified. Check the MAC addresses
carefully before specifying them. If the corresponding MAC address does not exist,
you will become unable to access the network.
3-25
Protocol Settings
3