Canon imageRunner 6570 Network Manual page 45

● If you do not want to spool a print job on the machine's hard disk
before starting printing:
❑
On the Network Settings screen, press [▼] or [▲] until [Use Spooler] appears ➞
press [Use Spooler].
❑
Press [Off].
IMPORTANT
If you are using the optional Multi-PDL Printer Kit, take note of the following:
- If the print job is sent from a Macintosh computer to a PS printer, you cannot
specify whether to spool under this option. Spooling is determined by the name of
the printer selected in the Macintosh Chooser. For more information, see "Setting
Up a Computer for Printing," on p. 6-8.
- If you print a file in PDF or PS format by specifying its URL on the Remote UI, the
print job will always be spooled, regardless of the settings made under this option.
NOTE
When you spool a print job on the machine's hard disk, the time required to release
a computer outputting a print job is shortened.
4
Confirm the settings you specified ➞ press [OK].
5
Press [Done] repeatedly until the Additional Functions screen
closes.
6
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The communication environment setup is complete. Proceed to Chapters 3 to 6,
depending on the protocol.
Communication Environment Setup
2
2-17