Interface Settings; Settings From The Control Panel - Canon imageRunner 6570 Network Manual

Interface Settings

You can specify the interface settings for the machine by using either of the
following:
•
The machine's control panel
•
The Remote UI (via a web browser)
This section describes how to specify the settings from the control panel.
IMPORTANT
If you are configuring the interface settings for the first time, use the control panel of this
machine. After configuring the protocol settings, you can change the content by using the
Remote UI.
NOTE
For instructions on how to enter settings using the Remote UI, see Chapter 3,
"Customizing Settings," in the Remote UI Guide.

Settings from the Control Panel

The procedures for specifying the settings from the control panel are as follows.
IMPORTANT
Settings specified from the control panel become effective after the machine is restarted,
after the procedure.
NOTE
For instructions on how to enter characters using the touch panel display, see Chapter 2,
"Basic Operations," in the Reference Guide.
1
Press (Additional Functions).
2-7
Interface Settings
2