Registering A Ca Certificate File Installed From A Computer - Canon imageRunner 6570 Network Manual

6
7
8
3
The procedure for editing key pairs is complete.

Registering a CA Certificate File Installed from a Computer

Apart from the X.509 (DER) format CA certificate preinstalled in the machine, you
can also register a CA certificate file which has been installed using a web browser
(Remote UI).
The procedure for registering installed files in the machine using the control panel
is as follows:
IMPORTANT
For instructions on how to install a CA certificate file, see the Remote UI Guide.
NOTE
•
Up to 50 CA certificate files can be registered.
•
X.509 is a standard for digital key certificates defined by the ITU (International
Telecommunications Union). DER (Distinguished Encoding Rules) is a binary encoding
format for digital key data.
•
A CA certificate is a digital certificate issued by a third party CA (Certificate Authority).
1
2
3-38
Protocol Settings
Press [Done].
The display returns to the TCP/IP Settings screen.
Press [Done] repeatedly until the Additional Functions screen
closes.
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
(Additional Functions) ➞ [System Settings] ➞
Press
[Network Settings].
Press [TCP/IP Settings].
The TCP/IP Settings screen is displayed.