Macintosh Network Settings - Canon imageRunner 6570 Network Manual

Macintosh Network Settings

Verify the Macintosh network settings.
1
Check that [AppleTalk] is active.
❑
Click [Chooser] on the [Apple] menu.
❑
Check that [Active] is selected under [AppleTalk]. If [Inactive] is selected, select
[Active].
2
Check that the AppleTalk connection method is [Ethernet].
❑
On the [Apple] menu, point to the control panels ➞ click [AppleTalk].
❑
Set the selection to [Ethernet].
❑
Close the [AppleTalk] dialog to save the setting.
NOTE
In an environment connecting to Ethernet through LocalTalk, select [Printer Port].
The Macintosh network settings are complete.
Macintosh Network Settings
6
6-3