Cli: Viewing And Configuring Gvrp - HP 4108GL Management And Configuration Manual

CLI: Viewing and Configuring GVRP

GVRP Commands Used in This Section
show gvrp below
gvrp page 14-40
unknown-vlans page 14-40
Displaying the Switch's Current GVRP Configuration. This command
shows whether GVRP is disabled, along with the current settings for the
maximum number of VLANs and the current Primary VLAN. (For more on the
last two parameters, see "Port-Based Virtual LANs (Static VLANs)" on page
14-4.)
show gvrp
Syntax:
Figure 14-25. Example of "Show GVRP" Listing with GVRP Disabled
Figure 14-26. Example of Show GVRP Listing with GVRP Enabled
Port-Based Virtual LANs (VLANs) and GVRP
Shows the current settings.
This example includes
non-default settings for
the Unknown VLAN field
for some ports.
GVRP
14-39