HP 4108GL Management And Configuration Manual page 275

Table 13-4.Candidate Configuration Options in the Menu Interface
Parameter Default Setting
Stack State Candidate
Auto Join Yes
Transmission Interval 60 Seconds
Using the Menu To "Push" a Switch Into a Stack, Modify the Switch's
Configuration, or Disable Stacking on the Switch. Use Telnet or the
web browser interface to access the Candidate if it has an IP address. Other-
wise, use a direct connection from a terminal device to the switch's console
port. (For information on how to use the web browser interface, see the online
Help provided for the browser.)
1.
2.
Figure 13-8. The Default Stack Configuration Screen
3.
Other Settings
Commander, Member, or Disabled
No
Range: 1 to 300 seconds
Display the Stacking Menu by selecting
Display the Stack Configuration menu by pressing [3] to select
Configuration .
Move the cursor to the Stack State field by pressing [E] (for
HP Procurve Stack Management
HP Procurve Stack Management
Stacking in the console Main Menu.
Edit
Stack
).
13-17