Using The Menu Interface; Overview - HP 4108GL Management And Configuration Manual

Using the Menu Interface

Overview

Overview

This chapter describes the following features:
I
I
I
I
I
The menu interface operates through the switch console to provide you with
a subset of switch commands in an easy-to-use menu format enabling you to:
I
I
I
I
I
For a detailed list of menu features, see the "Menu Features List" on page 2-14.
Privilege Levels and Password Security. HP strongly recommends that
you configure a Manager password to help prevent unauthorized access to
your network. A Manager password grants full read-write access to the switch.
An Operator password, if configured, grants access to status and counter,
Event Log, and the Operator level in the CLI. After you configure passwords
on the switch and log off of the interface, access to the menu interface (and
the CLI and web browser interface) will require entry of either the Manager
or Operator password. (If the switch has only a Manager password, then
2-2
Overview of the Menu Interface (page 4-1)
Starting and ending a Menu session (page 2-3)
The Main Menu (page 2-7)
Screen structure and navigation (page 2-9)
Rebooting the switch (page 2-12)
Perform a "quick configuration" of basic parameters, such as the IP
addressing needed to provide management access through your network
Configure these features:
• Manager and Operator pass-
words
• System parameters
• IP addressing
• Time protocol
• Ports
• Trunk groups
View status, counters, and Event Log information
Update switch software
Reboot the switch
• A network monitoring port
• Stack Management
• Spanning Tree operation
• SNMP community names
• IP authorized managers
• VLANs (Virtual LANs) and
GVRP