Trunk Group Operation Using Lacp - HP 4108GL Management And Configuration Manual

Trunk Group Operation Using LACP

The switch can automatically configure a dynamic LACP trunk group or you
can manually configure a static LACP trunk group. The methods for displaying
N o t e
LACP requires full-duplex (FDx) links of the same media type (10/100Base-T,
100FX, etc.) and speed, and enforces speed and duplex conformance across
a trunk group.
LACP trunk status include:
Trunk Display Method
CLI
CLI
Port/Trunk Settings screen in menu interface
In most cases, trunks configured for LACP on the Switch 4108GL operate as
described in table 11-6:
Optimizing Port Usage Through Traffic Control and Port Trunking
show lacp
command
show trunk
command
Static LACP Trunk Dynamic LACP Trunk
Included in listing. Included in listing.
Included in listing. Not included.
Included in listing. Not included
Port Trunking
11-25