Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 8-4. The System Information Screen (Default Values)
2.
3.
4.
5.
8-6
Press [E] (for
). The cursor moves to the
Edit
Use [v] to move the cursor to the
Use the Space bar to select
to the
field.
SNTP Mode
Do one of the following:
•
Use the Space bar to select the
move the cursor to the
Broadcast mode details, see "SNTP Operating Modes" on page 2.)
•
Use the Space bar to select the
following:
Press [>] to move the cursor to the
i.
Time Protocol Selection Parameter
– TIMEP
– SNTP
– None
System Name
Time Sync Method
, then press [v] once to display and move
SNTP
mode, then press [v] to
Broadcast
Poll Interval
field, and go to step 6. (For
mode, then do the
Unicast
Server Address
field.
field.
field.