Adjusting The Throttle Cable Fr 2111, Fr 2113; Replacing The Fuel Filter Fr 2111, Fr 2113 - Jonsered FR2115MA Operator's Manual

Riding mower
Hide thumbs Also See for FR2115MA:
Table of Contents

Advertisement

MAINTENANCE FR 2111, FR 2113
Adjusting the throttle cable
The throttle cable may need to be adjusted, if the
engine does not respond as it should when
accelerating, if it produces black smoke or
maximum revs are not reached.
1. Loosen the clamping screw (by the arrow), and
slide the throttle to the choke position.
2. Pull the throttle cable's casing as far as possible
to the right and check that the choke is fully
actuated.
3. Tighten the clamping screw.
4. Pull back the throttle to the full throttle position
and check that the choke is no longer actuated.
Replacing the fuel filter
Replace the new fuel filter mounted on the supply
line after every 100 hours (once per season) or
more frequently if it is clogged.
Replace the filter as follows:
1. Fold up the engine cover.
2. Move the hose clips away from the filter.
Use a pair of flat pliers.
3. Pull the filter away from the ends of the hose.
4. Press the filter into the ends of the hose. If
necessary, a soap solution can be applied to
the ends of the filter to simplify assembly.
5. Move the hose clips back towards the filter.
26
– English
6008-032
6008-033
8009-108
6008-034

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr 2113maFr2111Fr2113a

Table of Contents