Adjusting the parallelism of the mowing
deck on FR 2115 MA
1. Check that the tyres' air pressure is 60 kPa
(0.6 kp/cm
2
/8.5 PSI).
2. Remove the front cover and the right-hand wing
cover.
3. Loosen the parallelism stay's nuts.
4. Screw out (extend) the stay to raise the rear
edge of the cover. Screw in (shorten) the stay to
lower the rear edge of the cover.
5. Tighten the nuts after adjustment.
6. The parallelism should be checked again after
the adjustment has been made.
7. Fit the right-hand wing cover and the front cover.
36
– English
MAINTENANCE FR 2115 MA
6017-155