Labelling Input Sources; Skipping Hdmi/Pc Input; Colour System Settings - Sharp LC-40LX710H Operation Manual

Settings when using external devices

Labelling input sources

You can assign each input source a label as you
prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press b/c/d to select "Option".
4
Press a / b to select "Terminal setting", and
5
then press ENTER.
Press a / b to select "Input label", and then
6
press ENTER.
Press a / b/c/d to select characters and
7
c / d to move to the desired position to label
the input source.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
8
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select"END".
Tool
:Enter
NOTE
• You cannot change labels if the input source is "A-TV" or
"D-TV".
48
40LX710H_en.indd 48 40LX710H_en.indd 48
Menu
CH list
:Exit
INPUT
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
DVD
INPUT7
INPUT8
USB
(Example)

Skipping HDMI/PC input

This setting allows you to skip the HDMI or PC input
on the "Input Select" menu.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Option".
3
Press a / b to select "Terminal setting", and
4
then press ENTER.
Press a / b to select "Input skip", and then
5
press ENTER.
Press a / b to select the Input (INPUT1 to
6
INPUT4 or INPUT8 (RGB)) you wish to skip.
CH list
:Enter :Back
Press c / d to select "Yes".
7
Press MENU to exit.
8

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Option".
3
Press a / b to select "Colour system", and
4
then press ENTER.
Press a / b to select a compatible video signal
5
system of your equipment, and then press ENTER.
SECAM
NTSC3.58
NTSC4.43
PAL-60
NOTE
• Factory preset value is "Auto".
• If "Auto" is selected, colour system for input signal is automatically
set. If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• "Colour system" is selectable only when inputting an S-VIDEO or
composite signal.
Menu
Setup
Τerminal setting
Input skip
INPUT1(HDMI)
Yes No
Skip Input selection of HDMI
INPUT3(HDMI)
Auto
PAL
2010/04/15 16:12:38 2010/04/15 16:12:38