Manual Setting For Each Channel (Analogue) - Sharp LC-40LX710H Operation Manual

Watching TV

Manual setting for each channel (Analogue)

(continued)
Sound system (Broadcasting system)
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a / b to select "Sound sys.", and then
2
press ENTER.
• Receivable sound systems (Broadcasting systems)
are listed.
Sound system menu
Search
Fine [48.25]
Colour sys. [PAL]
Sound sys. [ I ]
Label [ ]
Skip [Off]
Lock [Off]
Press a / b to select the optimum sound
3
system, and then press ENTER.
NOTE
• Check the sound system if the sound output was not
correct.
Labelling channels
You can change individual channel names.
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a / b to select "Label", and then press
2
ENTER.
• The alphabet and numbers are listed.
Search
Fine [48.25]
Colour sys. [PAL]
Sound sys. [ I ]
Label [ ]
Skip [Off]
Lock [Off]
Press a / b / c / d to select each character of
3
the new name for the channel, and then press
ENTER.
Repeat until the name is fully spelt out.
4
• The name can be 5 characters or less. Select
"END" to set the channel name.
40LX710H_en.indd 23 40LX710H_en.indd 23
B/G
D/K
I
M
Labelling menu
A B C D E F G H I J CLEAR
K L M N O P Q R S T BACK
U V W X Y Z + . _
0 1 2 3 4 5 6 7 8 9 END
Skipping channels
Channels with "Skip" set to "On" are passed over
when using CH r / s even if selected while watching
the image from the TV.
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information will be displayed.
Press a / b to select "Skip", and then press
2
ENTER.
• Skip menu displays.
Skip menu
Search
Fine [48.25]
Colour sys. [PAL]
Sound sys. [ I ]
Label [ ]
Skip [Off]
Lock [Off]
Press a / b to set "Skip" to "On", and then
3
press ENTER.
Setting the child lock
You can block the viewing of any channel.
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information will be displayed.
Press a / b to select "Lock", and then press
2
ENTER.
• Child lock menu will be displayed.
Lock menu
Search
Fine [48.25]
Colour sys. [PAL]
Sound sys. [ I ]
Label [ ]
Skip [Off]
Lock [Off]
Press a / b to set "Lock" to "On", and then
3
press ENTER.
NOTE
• See page 28 for setting a password.
• If "Lock" is set to "On" for a channel, "Child lock has been
activated" is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing RETURN while "Child lock has been
activated" is displayed, password input menu will be
displayed. Inputting the correct password lifts the child lock
temporarily until the power is turned off.
Off
On
Off
On
23
2010/04/15 16:11:34 2010/04/15 16:11:34