Labelling Input Sources; Skipping Hdmi/Pc Input; Colour System Settings - Sharp Aquos LC-32A33X Operation Manual

Settings when using external devices

Labelling input sources

You can assign each input source a label as you
prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
• When an HDMI input terminal (INPUT 3 and
INPUT 4) is selected, a Menu screen for selecting
"Auto" or "Manual" is displayed.
• When you select "Auto" using a / b , the Menu
screen returns to the "Input Label" Menu screen.
Press a / b to select characters and c / d
5
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input Label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
6
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
TV
NOTE
• You cannot change labels if the input source is TV.
32A33X_en_f.indd 39 32A33X_en_f.indd 39
INPUT1
INPUT2
DVD
INPUT4
(Example)

Skipping HDMI/PC input

This setting allows you to skip the HDMI or PC input
on the Input Selection Operation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Input Skip", and then
3
press ENTER.
Press a / b to select the Input (INPUT 3 to
4
INPUT 5) you wish to skip, and then press
ENTER.
INPUT 3 Select desired item
INPUT 4
INPUT 5 Yes
No
Press a / b to select "Yes", and then press
5
ENTER.
Press MENU to exit.
6

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Colour System", and
3
then press ENTER.
Press a / b to select a compatible video signal
4
system of your equipment, and then press
ENTER.
Select desired item
AUTO
PAL
SECAM
NTSC 3. 58
NTSC 4. 43
PAL-60
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• "Colour System" is selectable only when inputting an
S-VIDEO or composite signal.
39
2008-1-4 20:15:53 2008-1-4 20:15:53