Settings When Using External Devices; Settings When Using Hdmi Output Devices; Audio Select For Connecting Hdmi - Sharp LC-40LX710H Operation Manual

Settings when using external devices

Settings when using HDMI output devices

HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select "INPUT1", "INPUT2", "INPUT3" or "INPUT4"
by switching the input source.
Co nnecting an HDMI output device
HDMI output device
w HDMI (High-Defi nition Multimedia Interface)
Auto View
To watch an HDMI equipment image, select
1
"INPUT1", "INPUT2", "INPUT3" or "INPUT4"
using TV/VIDEO on the remote control unit or
on the TV.
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press b/c/d to select "Option".
4
Press a / b to select "Terminal setting", and
5
then press ENTER.
Press a / b to select "HDMI auto view", and
6
then press ENTER.
• The HDMI auto view can be selected only when
"INPUT1", "INPUT2", "INPUT3" or INPUT4 is
selected.
CH list
:Enter
46
40LX710H_en.indd 46 40LX710H_en.indd 46
HDMI cable
(commercially available)
Menu
Setup
:Back Option
Τerminal setting
Output volume select
[Fixed]
Input skip
Input label
[ ]
HDMI auto view
[Enable]
Allow HDMI view mode to change
Press a / b to select the desired item, and
7
then press ENTER.
Selectable items
Enable/Disable Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.

Audio select for connecting HDMI

When connecting HDMI to the INPUT4 terminal, and
inputting analogue audio signals from the INPUT4
(AUDIO) terminal.
Go to "Menu" s "Setup" s "Option" s "Terminal
setting" s "PC input" s "Audio select".
Selected items
HDMI (Digital) When connecting devices with HDMI
cable to the INPUT4 terminal.
HDMI + Audio When connecting devices with HDMI
input cable to the INPUT4 terminal and
inputting analogue audio signals from
the INPUT4 (AUDIO) terminal.
NOTE
• You must set this to "HDMI+Analogue" when connecting
devices with an HDMI-certifi ed cable to the INPUT4
terminal. If "HDMI (Digital)" is set, there will be no sound
output.
Description
Description
2010/04/15 16:12:34 2010/04/15 16:12:34