Protection Against Overturning - Sharp LC-40LX710H Operation Manual

Preparation

Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
Affi x the 2 clamps (supplied)
1
to the product using the
screws (supplied).
Affi x the TV to the wall or a
2
pillar using extra strong ties
and cup hooks.
Fixing the TV to the table (For LC-60LX710H only)
Place the TV on the table.
1
Attach the two supplied restraining brackets to
2
the stand with four supplied screws.
Insert commercially available screws in the
3
holes of the restraining brackets from the top
and tighten the screws to secure the TV to the
table.
• Use commercially available screws of the proper
size to fi rmly secure the TV.
CAUTION
• As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product's weight. The table should
be set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
8
40LX710H_en.indd 8 40LX710H_en.indd 8
View from the top
Cup hook (commercially available)
Screws for attaching clamps (supplied)
Restraining brackets (supplied)
Tie (commercially available)
Wall
Clamps
(supplied)
Stand
Screws
(Supplied)
Restraining brackets
(supplied)
Screws (Commercially
available)
2010/04/15 16:11:08 2010/04/15 16:11:08