Selecting The Input Source And Signal Type; Selecting Input Source; Labelling Input Sources; Input Label - Sharp LC-32G100H Operation Manual

Settings when using external devices

Selecting the input source and signal type

Selecting input source

Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Press TV/VIDEO on the remote control unit or
1
on the TV.
Press TV/VIDEO on the remote control unit or
2
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a / b .
POWER
MENU
TV/VIDEO
CH
VOL

Labelling input sources

You can assign each input source a label as you
prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
Press a / b / c / d to select letters to label the
5
input source.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input Label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
6
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
TV
NOTE
• You cannot change labels if the input source is "TV".
DVD
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
(Example)
35