Energy Conservation Settings; Auto Power-Off At A Designated Time; Eco Picture Control; Energy Save - Sharp LC-40LX710H Operation Manual

Watching TV

Energy conservation settings

Auto power-off at a designated time

This function is conveniently used when, for instance,
going to bed while watching TV.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep timer: Remain 2 hr. 00 min.
Each time you press SLEEP, the remaining
2
time switches as shown below.
0 hr. 30 min.
Off
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
Using Sleep timer on the menu screen
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
Press a / b to select "Sleep timer", and then
4
press ENTER.
Press a/b to select "Change", and then
5
press ENTER.
Press a / b to select the desired item, and
6
then press ENTER.
30
40LX710H_en.indd 30 40LX710H_en.indd 30
1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min.

ECO picture control

This function automatically detects the image source
and decreases the power consumption while keeping
the brightness of the image unchanged.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
• ECO menu displays.
Press a / b to select "ECO picture control".
4
Press c / d to select "On" or "Off".
5
NOTE
• This function does not work when "AV mode" is set to
"DYNAMIC (Fixed)" or "Auto".
• This function does not work when "Energy save" is set to
"Standard" or "Advanced".

Energy save

This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
• ECO menu displays.
Press a / b to select "Energy save", and then
4
press ENTER.
Press a / b to select "Standard" or
5
"Advanced", and then press ENTER.
Selected item
Standard Reduces the backlight brightness by
25%.
Reduces the backlight brightness by
Advanced
50%.
Off The backlight brightness is the same
value of your settings in the selected "AV
mode ".
Description
2010/04/15 16:11:57 2010/04/15 16:11:57