Connecting A Pc; Analogue Connection; Audio Select For Connecting A Pc - Sharp LC-40LX710H Operation Manual

Connecting a PC

Use the PC terminals to connect a PC.

Analogue Connection

Ø 3.5 mm stereo minijack cable
(Commercially available)
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11

Audio select for connecting a PC

When using the INPUT8 (PC) terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue
audio input.
Go to "Menu" s "Setup" s "Option" s "Terminal setting" s "PC input" s "Audio select".
Selected items
Video When connecting devices with AV cable to the INPUT8 (PC) terminal, display images without audio.
Video+audio When connecting a PC to the INPUT8 (PC) terminal, and inputting analogue audio signals from the INPUT8
(AUDIO) terminal.
50
40LX710H_en.indd 50 40LX710H_en.indd 50
RGB cable
(Commercially
available)
PC
Pin No. Signal name
R
G
B
Not connected
CSYNC
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
Pin No. Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Description
Pin No. Signal name
Not connected
SDA
HD
VD
SCL
2010/04/15 16:12:44 2010/04/15 16:12:44