Mounting The Tv On The Wall; Removing The Stand - Sharp LC-40LX710H Operation Manual

Appendix

Mounting the TV on the wall

Removing the stand

For wall mounting with the optional bracket (AN-37AG2+AN-37P30 or AN-52AG4) remove the stand.
Before setting TV on the wall.
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1
Screwdriver
Soft cushion
Lay the TV fl at.
• Spread a cushion over the base area to lay the TV on.
1 Unfasten the 4 screws on the rear of the TV.
2 Remove the stand.
3
Screwdriver
1 Attach the stand post to the TV.
2 Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
• Use the screwdriver.
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
66
40LX710H_en.indd 66 40LX710H_en.indd 66
2
Stand post
1
2
1
2
1 Unfasten the 4 screws.
2 Remove the stand post from the stand.
Stand post
Stand
2010/04/15 16:13:04 2010/04/15 16:13:04