Before Turning On The Power - Sharp LC-40LX710H Operation Manual

Preparation

Before turning on the power

Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
Connecting the antenna cable
1
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(commercially available)
Room antenna terminal
(75-ohm type)
Connecting external devices
2
See pages 13 to 14 for connecting external equipment, such as a VCR and DVD player.
Connecting the AC cord
3
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
Bundling the cables
4
As the picture illustrated, insert the cable clip into the hole on the TV, and put the cable into the cable clip
for banding.
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
12
40LX710H_en.indd 12 40LX710H_en.indd 12
To antenna
terminal
AC outlet
AC cord
TV (rear view)
2010/04/15 16:11:12 2010/04/15 16:11:12