Labelling Input Sources; Skipping Hdmi/Rgb Input; Colour System Settings - Sharp Aquos LC-65RX1X Operation Manual

Settings when using external devices

Labelling input sources

You can assign each input source a label as you prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
Press a / b / c / d to select each character of
5
the new name for the input source, and press
ENTER.
DVD
A B C D
K L M N
U V W X
0 1 2 3 4 5 6 7 8 9
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input Label"
screen, and then press ENTER.
Repeat until the name is fully spelt out.
6
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select "END", then press
ENTER to exit from the labelling menu.
INPUT SOURCE
TV
NOTE
• You cannot change labels if the input source is TV.
• The display for INPUT SOURCE selecting is only displayed
when you toggle the input by using TV/VIDEO on the
remote control.
50
E F G H I J CLEAR
O P Q R S T BACK
Y Z + – . _
END
(Example)
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
DVD
INPUT7
(Example)

Skipping HDMI/RGB input

This setting allows you to skip the HDMI or PC input
on the input source Selection operation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a/b to select "Input Skip", and then
3
press ENTER.
Press a / b to select the Input (INPUT4 to
4
INPUT7) you wish to skip, and then press
ENTER.
INPUT 4 (HDMI)
INPUT 5 (HDMI)
INPUT 6 (HDMI)
INPUT 7 (RGB)
Press c / d to select "Yes", and then press
5
ENTER.
Press MENU to exit.
6

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Colour System", and
3
then press ENTER.
Press a / b to select a compatible video signal
4
system of your equipment, and then press
ENTER.
NOTE
• Factory preset value is "Auto".
• If "Auto" is selected, colour system for input signal is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• "Colour System" is selectable only when inputting an
S-VIDEO or composite signal.
Yes No
Auto
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60