Configuring The Network Settings; Checking The Network Status - Kyocera FS-C1020MFP+ Operation Manual

8. Configuring the Machine Using COMMAND CENTER

Configuring the Network Settings

Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [IPv6 Configuration], [Network Application],
[DNS], [Auto E-mail Notification], [SNMP], [SMTP], [POP3], and [Internet Fax].

Checking the Network Status

Click the [Network Status] tab on the network settings page to display network information.
General Status
Item
Ethernet Speed
IPP Printer Name
Network Version
MAC Address
TCP/IP Status
Item
DHCP
IP Address
Subnet Mask
320
Shows the type and speed of the network connection.
Shows the name used to identify the machine on the network.
Shows the version of the machine's network module (a part of the machine
firmware).
Shows the MAC address of the machine.
Select whether the machine should receive a dynamic IPv4 address
automatically using DHCP. To use DHCP, select [Active]. When enabled,
the items below cannot be configured.
Enter the IPv4 address for the machine.
Enter the subnet mask of the network.
Description
Description