Checking The Counter Information - Kyocera FS-C1020MFP+ Operation Manual

8. Configuring the Machine Using COMMAND CENTER
Item
Cyan
Waste Toner Bottle
Intermediate Transfer
Unit
Fusing Unit
Transfer Roller
Paper Tray
Item
Tray 1
Tray 2
Bypass Tray
• The information about tray 2 appears only when it is installed.
• If non-genuine print cartridges are installed, toner life cannot be reliably indicated.
• For details about the machine's location and contact information, see p.325 "Configuring the
SNMP Settings".
• For details about the machine's host name, see p.323 "Configuring the DNS Settings".

Checking the Counter Information

Click the [Counter] tab on the main page to check the counter information.
302
Shows the amount of cyan toner remaining.
Shows the remaining life of the waste toner bottle, as "Status OK", "Almost
Full" or "Full".
Shows the remaining life of the transfer unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your service representative.
Shows the remaining life of the fusing unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your service representative.
Shows the remaining life of the transfer roller, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your service representative.
Shows the current state and paper size/type setting of tray 1.
Shows the current state and paper size/type setting of tray 2.
Shows the current state and paper size/type setting of the bypass tray.
Description
Description