Table of Contents
Advertisement
7.
Pull the opening lever on the front cover, and then carefully lower the front cover.
Be sure to set the registration roller in the position shown by the arrow in the illustration below.
Clean the registration roller if prints are smeared after a paper jam is cleared.
8.
Clean the registration roller by applying a soft damp cloth while turning it.
9.
Using both hands, carefully push up the front cover until it closes.
10.
Plug in the power cord securely. Connect all the interface cables that were removed.
11.
Turn on the power.
• When closing the front cover, push the upper area of the cover firmly.
CES141
CES089
CES142
Cleaning
405
Hide quick links:
Advertisement
Table of Contents
