Kyocera FS-C1020MFP+ Operation Manual page 45

Hide thumbs Also See for FS-C1020MFP+:
Table of Contents

Advertisement

2. Getting Started
• During operation, rollers for transporting the paper and originals revolve. A safety device has
been installed so that the machine can be operated safety. But take care not to touch the
machine during operation. Otherwise, an injury might occur.
• Removed tape is dirty. Be careful not to let it touch your hands or clothes.
• Leave the protective materials in place while moving the machine.
• Lower the machine slowly and carefully to prevent trapping your hands.
• Do not grip on the tray area when lifting the machine.
• Do not allow paper clips, staples, or other small objects to fall inside the machine.
• Keep uncovered print cartridges away from direct sunlight.
• Do not touch the print cartridge's photo conductor unit.
• Do not touch the ID chip on the side of the print cartridge as indicated in the illustration below.
1.
Remove the plastic bag.
44
CER088
CES032

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents